Raypak 206 Digital Pool Heater 0-2000 ft.

#009216 Raypak 206 Digital Pool and Spa Heater, Natural Gas
Elevation: 0-2000 (feet)
Free Shipping!
Available Models:
Raypak Part #009216 Model# P-R206A-EN-C #50
Rheem Part #009962 Model #P-M206A-EN-C #50
Ruud Part    #009994 Model #P-D206A-EN-C #50
Not for use in parts of Southern California!

Now Raypak Residential model heaters include the new ProTek Shield!

The Raypak 206 Digital gas heater has a polyester-coated, non-corrosive cabinet that is more durable than solventborne- and waterborne-coated metal cabinets. Every piece of sheet metal goes through a 7-stage wash system, making certain the powder paint has a perfect bond. Underneath the tough, yet beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service.

No need for fans to combat drafting problems under normal conditions. This heater is designed to draft naturally in outdoor installations with its exclusive low-profile design. It is so thoughtfully and carefully designed, it actually protects itself from the things that tend to stifle ordinary pool and spa heaters. It delivers uninterrupted heating performance regardless of falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc.

These 206 digital units are available with two different control designs to meet your requirement. They are available with digital electronic ignition, or as a millivolt design. The digital system (pictured) requires external power (120VAC or 240VAC) and generates a pilot only when there is a call for heat. It provides simple setup and easy programming, as well as easy-to-understand diagnostics and simple connections to remote controls. The millivolt ignition system does not require external power. It generates its' own current internally, with a small thermocouple driven by the constant pilot. The millivolt ignition system is not available in California for natural gas units. See Digital vs Millivolt for more details.

Polymer headers prevent rust stains from harming your pool’s surface, giving you years of trouble-free swimming pleasure.

The 206 fin tubes of the heat exchanger are each made from a single piece of extruded copper. This integral-fin design allows maximum heat transfer to be attained and maintained. Cupro-nickel is also available as an optional upgrade.

Stainless steel tube sheets are used on all Raypak 206 heaters with the polymer headers. This allows for a completely nonferrous waterway, leaving your pool truly rust-free.

Standard with every 206 is a set of 2" slip-fit CPVC water connections to make your installation secure and effortless.

The Unitherm Governor inside the header helps reduce condensation from low inlet water temperatures. It automatically regulates the water flow to help keep the water temperature in the heat exchanger above 105°F. Both water temperature and water flow rate are controlled to eliminate condensation, sooting, and scale build-up that can shorten heater life.

The Raypak 206 digital gas heater comes with an automatic bypass built into the header. You'll find that the heater is capable of handling water flow at a rate up to 125 GPM.

Every burner tray is built to last, from the stainless steel burners to the aluminized metal used in the heat sensitive areas. Innovative design allows for the easy removal of the tray and burners for servicing.

A ceramic fiber combustion box keeps your heater running efficiently while keeping the outside jacket cool. By using this space-age material the heater won't retain residual heat after it is turned off, allowing it to be installed without the use of costly metal heat sinks.

Energy-smart 206 digital heaters consistently achieve the highest efficiency ratings. They exceed all federal and state standards.

www.raypak.com
Raypak Digital Pool & Spa Heaters Brochure