• The cart is empty.
    {{shoppingcart.totalQuantityDisplay}}
    Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
    • (714)777-1200
  • The cart is empty.
    {{shoppingcart.totalQuantityDisplay}}
    Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
    • TC Pool Equipment Co. LLC
    (714)777-1200

    Raypak XTHERM P-2005A Commercial Pool Heater | 014393

    Our Products: Pool Heaters > Raypak Pool Heaters > Raypak Commercial Pool Heaters > Raypak XTHERM 1005A-2005A Commercial LowNOx Pool Heaters
    SKU: 014393
    Weight: 1461 lbs
    Units in Stock: 2
    #014393 Raypak XTHERM P-2005A Commercial Pool Heater, 2M BTU
    GTIN: 840891037750
    List Price: $51,999.99
    Price: $51,000.00
    Add to Wishlist Add to Wishlist
    Raypak XTHERM P-2005A Commercial Pool Heater | 014393
    Raypak XTHERM P-2005A Commercial Pool Heater | 014393
    Previous Item Previous Item   Next Item Next Item
    Product Details
    Raypak 407 Digital LowNOx Heater 009243 | P-R407AL-EN-C #26
    #014393 Raypak XTHERM P-2005A Commercial Pool Heater, 2000000 BTU
    0-4500 (feet)
    Natural Gas
    Raypak’s XTherm product packs everything you need into one cabinet – a vertical heat exchanger, ultra-high efficiency (up to 97%), a heater pumping package, easy-to-understand diagnostics, low emissions, even a built-in multi-unit controller. The result is a pool heater that is practically plug-and-play.

    Features:
    97% Thermal Efficiency at Full Rate.
    Positive vent pressure, Condensing Appliance.  Cat IV Vent Required.
    Bronze Headers with Cupro-Nickel Finned-Tube Primary Heat Exchanger. 316L Stainless Steel Condensing Heat Exchanger. ASME Section IV constructed and stamped, National Board registered.
    CSA Low-Lead certified, less than 0.25% Lead.
    Certified to ANSI Z21.56.
    Minimum Continuous Inlet Water Temperature: 50°F.
    Maximum Setpoint: 106°F.
    On/Off Operation with Soft Start.
    VERSA IC® Control Package with LCD Display.
    Status Display Lights.
    Cascade control of up to 4 units, no external sequencer required.
    Diagnostics Center with History, English, no codes.
    Modbus RTU BMS port (RS485).
    0-10 VDC BMS Interface (Setpoint or Direct Drive).
    All models indoor/outdoor construction.
    Certified under SCAQMD Rule 1146.2.  Meets all Low NOx regulations.
    Engineered with precisely matched system components.
    Smallest installed footprint (under 11 square feet) design fits tight spaces and easily replaces larger boilers.
    100% Factory Fire Tested.
    Complete cabinet protects all controls and wiring. Tough, rust-resistant powder-coat finish.
    Suitable for altitudes up to 10,000 ft. (derate above 5,000 ft.).
    Available for natural gas or propane.
    Integral Combustion Air Filter (MERV8).
    Multiple Pump Outputs – Heater Pump, System Pump.
    Whisper-Quiet Operation.
    Proudly Assembled in the USA.
    Options:
    BACNet IP, BACnet MS/TP, Modbus TCP, N2 Metasys (B-85)
    Lonworks (B-86)
    PVC Vent – Factory-Installed ONLY (D-32)
    Centrotherm® Polypropylene Vent Adapter (D-33)
    Alarm with 4” Bell (E-5)
    Low Water Cutoff (F-10)
    Condensate Neutralizer (Z-12)

    www.raypak.com